ND Graffiti Defend™ Application Instructions:

Comprehensive ND Graffiti Protect Technique™ Directions Are In this article

The substrate have to be initial primed with A person COAT™ Drinking water Based Primer/Sealer/End in ample quantity so that it’s visible and might be felt around the floor. Following it can be dry for the contact apply ND GRAFFITI Defend™ by spray (airless sprayer with 0.015 or 0.013 idea at about three hundred-500 PSI is suggested for some huge painted and all porous surfaces; very low pressure hand pump sprayer at about 35 PSI may very well be used on quite porous surfaces). The applying ought to be skinny and ND GRAFFITI Defend™ should really seem drinking water crystal clear when used. THE GRAFFITI SHIELD Method™ is a total of 4 individual coats of ND GRAFFITI Protect™ around the base application of ONE COAT™. Each and every coat have to be dry into the contact before subsequent coat is applied. Drying time could fluctuate involving jiffy to one hour dependent on the weather conditions, humidity and air flow. Graffiti Shield

THE GRAFFITI Defend Technique™ must be applied immediately after ninety six hrs that’s the heal time. You may guard the wall when it truly is curing by covering it using a drop fabric or securing the world. Need to cleaning be necessary before ninety six hrs, reapply ND GRAFFITI SHIELD™ into the wanted regions only. Usually do not permit this product to freeze and don’t use it in freezing temperatures. However, at the time it can be applied and cured, freeze/thaw cycles will have no impact on correct products effectiveness. No Slip Floor Coat

Get rid of new graffiti from THE GRAFFITI Defend Method™ in 24 hrs or much less for improved final results. Use our Vanish Natural Graffiti/Adhesive Remover™ – utilize to location and permit it to soak on graffiti for 5 minutes to about 15 minutes and flush with h2o, clean that has a gentle fabric, or powerwash the region. When required, contact up cleaned areas with a light-weight coat of ND GRAFFITI Protect™. Graffiti Remover

Make sure you examination this product on a small inconspicuous spot before proceeding Along with the job.